Exhaust, Mufflers & Tips

Creates maximum performance and extreme mileage gains. The free flowing rear side exit exhaust system is constructed out of 2.25 in. mandrel bent 409 stainless steel and uses bayonet style hangers and band clamps for a hassle free installation. Fits both...

This MACH Force XP Hi-Tuck Axle-Back exhaust system is constructed of 2.5" mandrel-bent 409 stainless steel and comes complete with a free-flowing muffler, tubing, OE style bayonet hangers, band clamps and all hardware necessary for a hassle-free...

aFe Power introduces an all new Rebel Series dual middle-side exit exhaust system for the 2016-2017 Nissan Titan with V8-5.6L engine. This Rebel Series cat-back is designed with dual black exhaust tips that exit in front of the rear passenger tire for a...

This MACH Force-Xp Cat-Back exhaust system is constructed of 2-1/2" to 3-1/2" mandrel-bent 409 stainless steel and comes complete with free-flowing muffler, tubing, OE style bayonet hangers, band clamps and all hardware necessary for a hassle-free...

Creates maximum performance and extreme mileage gains. The free flowing rear side exit exhaust system is constructed out of 2.25 in. mandrel bent 409 stainless steel and uses bayonet style hangers and band clamps for a hassle free installation. Uses all...

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP...

This cat-back exhaust system is constructed of 2-1/2 IN - 3 IN mandrel-bent 409 stainless steel tubing for maximum strength and durability. This system features a high-flow 409 stainless steel muffler, producing a mild sound. Finishing off this exhaust...

This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent 409 stainless steel tubing for maximum strength and durability. This system features a high-flow 409 stainless steel muffler, producing a deep sound. This system produces a deep sound...

This cat-back exhaust system is constructed of 2-1/2" mandrel-bent 409 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system is a 2-1/2" diameter 304 stainless steel clamp-on exhaust tip. The tip features a laser...

Release the untapped horsepower, torque and sound from your Toyota Tacoma L4-2.7L / V6-3.5L with aFe POWER Mach Force Xp exhaust system. Constructed from 2-1/2" to 3" mandrel bent 409 stainless steel for improved flow and long-lasting performance, the...

This Rebel Series cat-back is designed with dual black exhaust tips that exit in front of the rear passenger tire for a unique, aggressive look. The tips come with unique laser-etched aFe Power logos on the side and are constructed from stainless steel...

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of...

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of...

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of...

aFe power introduces the MACH Force-Xp cat-back exhaust system for the Toyota Tacoma with V6-3.5L engine. This cat-back exhaust is constructed out of 3 100% MIG-welded, mandrel-bent, stainless steel tubing for maximum flow. The smooth transition bends...

aFe introduces the MACH Force XP exhaust system for the BMW M5 F10 twin-turbo. In recent testing this system produced 18 horsepower and 30 lbs. x ft. of torque. This unique exhaust system is constructed from TIG-welded, 3 in. mandrel bent 304 stainless...

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP...

This MACH Force XP Hi-Tuck Cat-Back exhaust system is constructed of 2.5 IN mandrel-bent 409 stainless steel and comes complete with a free-flowing muffler, tubing, OE style bayonet hangers, band clamps and all hardware necessary for a hassle-free...

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP...

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP...

This MACH Force XP Hi-Tuck "RB" Cat-Back exhaust system is constructed of 2.5" mandrel-bent 409 stainless steel and comes complete with a free-flowing muffler, tubing, OE style bayonet hangers, band clamps and all hardware necessary for a hassle-free...

aFe power introduces the MACH Force-Xp cat-back exhaust system for your Toyota Tacoma. This cat-back exhaust is constructed out of 2-1/2 IN 100% MIG-welded, mandrel-bent, stainless steel tubing for maximum flow. The smooth transition bends and free-flow...

Introducing the new aFe Power MACH Force XP dual exhaust system for the 05-09 Ford Mustang V6-4.0L. In recent testing, this system produced 12 horsepower and 16 lbs. x ft. of torque. This exhaust is constructed from 2.5in. mandrel bent, stainless steel...

Introducing the new aFe Power MACH Force XP dual exhaust system for the 05-09 Ford Mustang V6-4.0L. In recent testing, this system produced 12 horsepower and 16 lbs. x ft. of torque. This exhaust is constructed from 2.5in. mandrel bent, stainless steel...

This DPF-back exhaust system is constructed of 5" mandrel-bent 409 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system is a 6" diameter polished 304 stainless steel intercooled clamp-on exhaust tip. The tip...

This cat-back exhaust system is constructed of 4" mandrel-bent 409 stainless steel tubing for maximum strength and durability. This system features a high-flow 409 stainless steel muffler, producing a deep sound. Finishing off this exhaust system is a 5"...

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP...

This cat-back exhaust system is constructed of 3 IN mandrel-bent 409 stainless steel tubing for maximum strength and durability. This system features a high-flow stainless steel muffler, producing a deep sound. This system produces a deep sound...

This axle-back exhaust system is constructed of 3-1/2" - 4" mandrel-bent 409 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system is a 6" diameter polished stainless steel clamp-on exhaust tip. The tip features an...

This axle-back exhaust system is constructed of 3-1/2" - 4" mandrel-bent 409 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system is a 6" diameter black stainless steel clamp-on exhaust tip. The tip features an...

Apollo GT Series 3 IN 409 Stainless Steel Axle-Back Exhaust System w/ Black Tip Ford Ranger 19-23 L4-2.3L (t)This Part Fits:YearMakeModelSubmodel2019-2023FordRangerLariat2019-2023FordRangerXL2019-2023FordRangerXLT

Flow and Performance: This Large Bore-HD exhaust system is 100% hand MIG-welded and Constructed from 4" mandrel-bent 409 stainless steel tubing for maximum flow. The smooth transition bends allow for low turbulence, increasing horsepower, torque and...

This Rebel Series cat-back is designed with dual black exhaust tips that exit in front of the rear passenger tire for a unique, aggressive look. The tips come with unique laser-etched aFe Power logos on the side and are constructed from stainless steel...

aFe LARGE BORE HD exhaust systems are constructed from mandrel-bent stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower and torque, while decreasing EGT. The 2-piece design and bayonet style...

aFe LARGE BORE HD exhaust systems are constructed from mandrel-bent stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower and torque, while decreasing EGT. The 2-piece design and bayonet style...

aFe is proud to introduce the MACH Force-Xp Cat-Back exhaust system. This exhaust system outflows the factory exhaust. This cat-back exhaust is constructed of 4" mandrel-bent 409 stainless steel tubing and comes complete with free-flowing muffler,...

Introducing an all new Rebel Series Dual Center Exit Cat-Back exhaust system for the Jeep Wrangler (JK) with V6-3.6L/3.8L engine. This unique Rebel Series exhaust system is designed with dual center exit tips for an aggressive look. The Tips are 4-1/2"...

This Mach FORCE Xp exhaust system is constructed of 5" mandrel-bent stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT's.This Part...

Engineered to perform in the most extreme environments. Constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque and lower EGTS. All systems use factory mounting locations providing stability...

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP...

3" 409 Stainless Steel Construction: This axle-back exhaust system is constructed of 3" mandrel-bent 409 stainless steel tubing for maximum strength and durability. Aggressive Sound: This system produces an aggressive sound unleashing all available...

Large Bore-HD 5 IN 409 Stainless Steel DPF-Back Exhaust System w/Polished Tip RAM Diesel Trucks 19-24 L6-6.7L (td)This Part Fits:YearMakeModelSubmodel2019-2023Ram2500Big Horn2019-2023Ram2500Laramie2019-2021Ram2500Laramie...

Large Bore-HD 5 IN 409 Stainless Steel DPF-Back Exhaust System w/Black Tip RAM Diesel Trucks 19-24 L6-6.7L (td)This Part Fits:YearMakeModelSubmodel2019-2023Ram2500Big Horn2019-2023Ram2500Laramie2019-2021Ram2500Laramie...

Simple Installation: This DPF-back exhaust system uses factory mounting locations providing stability and hassle-free installation.OE Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions...

Now your 2019 Dodge Ram 5.7 HEMI can perform and sound as good as it looks with this MACH Force Xp cat-back exhaust system. In-house dyno testing produced gains of up to +22 horsepower and +26 lbs. x ft. torque for towing, track and street performance...

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP...

This cat-back exhaust system is constructed of 2-1/2 IN - 2-1/4 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler, producing a deep sound. This system produces a...

Give your Grand Cherokee a more aggressive look and sound with this MACH Force-XP Cat-Back system. Large tubing, a high-flow stainless steel muffler, and a dual resonated mid-pipe provide a deeper sound, without any drone when cruising.This Part...

This system features high-flow stainless steel mufflers, producing a deep sound while unleashing all available horsepower and torque. Utilizing factory style flanges and hangers, this system is a direct bolt-on which requires no cutting or modifications...

This axle-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow stainless steel muffler, producing a mild sound. Finishing off this exhaust system are...

This MACH Force-Xp exhaust system is constructed of mandrel-bent stainless steel tubing for maximum strength and durability. Featuring a high-flow stainless steel muffler that produces a deepened tone, this system is guaranteed to gain attention. The...

This system produced gains of up to +13 HP and +12 lbs. x Ft. TQ., as measured on our in-house dyno. This axle-back exhaust system is constructed of 2-1/2" mandrel-bent 304 stainless steel tubing for maximum strength and durability. Finishing off this...

This axle-back exhaust system is constructed of 2-1/2" mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler, producing a powerful sound. Optional tips are available...

This system produced gains of up to +5 HP and +7 lbs. x Ft. TQ., as measured on our in-house dyno. This cat-back exhaust system is constructed of 2-1/2" mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a...

Performance Gains: This system produced gains of up to +8 HP and +8 lbs. x Ft. TQ., as measured on our in-house dyno. 3" - 2-1/2" 304 Stainless Steel Construction: This axle-back exhaust system is constructed of 3" - 2-1/2" mandrel-bent 304 stainless...

This system produced gains of up to +12 HP and +15 lbs. x Ft. TQ., as measured on our in-house dyno. This cat-back exhaust system is constructed of 3 IN - 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system...

This system produced gains of up to +10 HP and +12 lbs. x Ft. TQ., as measured on our in-house dyno. This axle-back exhaust system is constructed of 3 IN - 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system...

This Takeda exhaust system is constructed of mandrel-bent stainless steel tubing for maximum strength and durability. Featuring a high-flow stainless steel muffler that produces a deepened tone, this system is guaranteed to gain attention. The...

This Takeda "muffler-delete" axle-back exhaust system eliminates the OE restrictive muffler and delivers a deepened exhaust tone while increasing performance.This Part...

2-1/2" 304 Stainless Steel Construction: This axle-back exhaust system is constructed of 2-1/2" mandrel-bent 304 stainless steel tubing for maximum strength and durability.Dual 4-1/2" Diameter Carbon Fiber Exhaust Tips: Finishing off this exhaust system...

This Takeda Cat-Back Exhaust System for the Honda Civic (Sedan) with the L4-1.5L turbo engine utilizes 2-1/2" into 2-1/4" stainless steel tubing and incorporates dual, high-flow mufflers for improved performance across the power band. To finish off the...

aFe is proud to introduce an all new Takeda Dual Cat-Back Exhaust System for the Honda Civic Sedan EX/EX-L/Touring with the I4-1.5L turbo engine. This cat-back exhaust system utilizes 2-1/2" to 2-1/4" stainless steel tubing and incorporates dual,...

This unique dual transverse exhaust system is constructed form mandrel bent stainless steel and is TIG welded. This system was designed and engineered by tuning the perfect tube lengths; ultimately maximizing performance across the power band while...

aFe is proud to introduce the new Takeda Axle Back Exhaust System. All aFe exhaust systems are engineered and manufactured in our Coronoa California manufacturing facility. This system uses factory mounting locations providing stability and hassle free...

This unique dual transverse exhaust system is constructed form mandrel bent stainless steel and is TIG welded. This system was designed and engineered by tuning the perfect tube lengths; ultimately maximizing performance across the power band while...

aFe is proud to introduce the new Takeda Dual Cat-Back Exhaust System for the 13-14 Honda Accord LX, EX, EX-L Sedan L4-2.4L. In recent testing this system produced 13 horsepower and 16 lbs. x ft. of torque. This exhaust starts out with an OE style flange...

aFe is proud to introduce the new Takeda Axle Back Exhaust System for the 2013-2016 Honda Accord Sport Sedan L4-2.4L. In recent testing this system produced 7 horsepower and 7 lbs. x ft. of torque. This exhaust starts out with an OE style flange and uses...

aFe is proud to introduce the new Takeda Axle Back Exhaust System. All aFe exhaust systems are engineered and manufactured in our Coronoa California manufacturing facility. This system uses factory mounting locations providing stability and hassle free...

This MACH Force-Xp exhaust system is constructed of mandrel-bent stainless steel tubing for maximum strength and durability. Featuring a high-flow stainless steel muffler that produces a deepened tone, this system is guaranteed to gain attention. The...

This system is constructed of 3" mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system deletes the factory resonator and replaces it with 3” tubing to produces a moderate exhaust tone. Utilizing a factory style flange...

This MACH Force-Xp exhaust system is constructed of mandrel-bent stainless steel tubing for maximum strength and durability. The state-of-the-art computer-aided technology utilized to design this system provides a precise fitment and provides a...

Unleash power and sound while improving the looks on your Z4 M Coupe with this MACH Force-Xp 2-1/2" 304 stainless steel cat back system. The larger diameter, mandrel bent tubing along with high-flow, stainless steel mufflers are less restricting for...

The Mach Force XP cat-back exhaust system produces 11 hp and 10 lbs./ft. of torque. constructed from 2.75 in. mandrel bent 304 hand brushed stainless steel and utilizes a unique crossover pipe that helps to equalize exhaust pressure and tunes the exhaust...

Introducing the new aFe Power MACH Force XP cat back exhaust system for the 07-13 BMW 328i E92 & E93 non-turbo. In recent testing, this system produced 4 horsepower and 8 lbs. x ft. of torque. This exhaust is constructed from 2.5in. brushed finish,...

The Mach Force XP cat-back exhaust system produces 11 hp and 10 lbs./ft. of torque. constructed from 2.75 in. mandrel bent 304 hand brushed stainless steel and utilizes a unique crossover pipe that helps to equalize exhaust pressure and tunes the exhaust...

The Mach Force XP cat-back exhaust system produces 11 hp and 10 lbs./ft. of torque. constructed from 2.75 in. mandrel bent 304 hand brushed stainless steel and utilizes a unique crossover pipe that helps to equalize exhaust pressure and tunes the exhaust...

This Takeda cat-back exhaust system by aFe POWER delivers superior performance, quality, and good looks. Mandrel-bent, 2-1/2" brushed finished 304 stainless steel offers optimum flow for dyno-proven performance gains of up to +18 HP and +19 lbs. x ft. TQ...

This Takeda cat-back exhaust system by aFe POWER delivers superior performance, quality, and good looks. Mandrel-bent, 2-1/2" brushed finished 304 stainless steel offers optimum flow for dyno-proven performance gains of up to +18 HP and +19 lbs. x ft. TQ...

Add dyno-proven performance and an aggressive exhaust sound by replacing the constrictive factory mufflers and tubing with this Takeda 2-1/2" open y-pipe and mid-pipe. This modular Takeda system increased exhaust velocity for performance gains of up to...

This system produced gains of up to +13 HP and +14 lbs. x Ft. TQ., as measured on our in-house dyno. This axle-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system...

This system produced gains of up to +6 HP and +7 lbs. x Ft. TQ., as measured on our in-house dyno. This cat-back exhaust system is constructed of 2-1/4 IN - 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system...

This cat-back exhaust system is constructed of 2-1/4 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel polished muffler, producing a deep sound. The muffler has a polished...

This cat-back exhaust system is constructed of 2-1/4 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel polished muffler, producing a deep sound. The muffler has a polished...

This system produced gains of up to +10 HP and +17 lbs. x Ft. TQ., as measured on our in-house dyno. This cat-back exhaust system is constructed of 2-1/2 IN - 3 IN mandrel-bent brushed finished 304 stainless steel tubing for maximum strength and...

This system produced gains of up to +10 HP and +17 lbs. x Ft. TQ., as measured on our in-house dyno. This cat-back exhaust system is constructed of 2-1/2" - 3" mandrel-bent brushed finished 304 stainless steel tubing for maximum strength and durability...

This system produced gains of up to +10 HP and +17 lbs. x Ft. TQ., as measured on our in-house dyno. This cat-back exhaust system is constructed of 2-1/2" - 3" mandrel-bent brushed finished 304 stainless steel tubing for maximum strength and durability...

This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler, producing an aggressive sound. Muffler finish may vary...

This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler, producing an aggressive sound. Muffler finish may vary...

This cat-back exhaust system is constructed of 3" to 2-1/2" mandrel-bent brushed finish 304 stainless steel tubing for maximum strength and durability. This system features a high-flow stainless steel muffler, producing a powerful sound. Muffler finish...

aFe POWER Mach Force-XP series cat-back exhaust system for the Toyota 4Runner with the V6-4.0L engine provides speed and style. Designed from 2-1/2" & 3" mandrel-bent, 304 stainless steel, this exhaust system offers greater flow to deliver more torque...

aFe is proud to introduce an all new Takeda Axle-Back Exhaust System for the Lexus RC200t and RC300 with the L4-2.0L turbo engine (also RC350 with V6-3.5L engine). This axle-back exhaust system utilizes 2" 304 stainless steel tubing and incorporates...

This axle-back exhaust system is constructed of 3 IN - 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler, producing a mild sound. Finishing off this exhaust...

This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow stainless steel black muffler, producing a mild sound. The muffler has a black finish...

The Vulcan’s unique X / H-pipe design improves the RAM TRX exhaust flow direction and utilizes no mufflers delivering more power and an aggressive tone throughout the RPM range without interfering with driver or passengers hearing in the cab. Both...

This system produced gains of up to +22 HP and +26 lbs. x Ft. TQ., as measured on our in-house dyno. This cat-back exhaust system is constructed of 3" mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a...

The Large Bore HD Performance Cat-Back exhaust features 4" 409 stainless steel tubing with smooth curves and increased size to help remove restriction and keeps exhaust gasses flowing smoothly. The OE style band-clamps and bayonet style hangers make...

The Scorpion Aluminized Hi-Tuck "Rock Basher" (RB) Cat-Back Exhaust System is constructed of 2-1/2" mandrel-bent aluminized steel tubing. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas...

The Scorpion Aluminized Hi-Tuck "Rock Basher" (RB) Cat-Back Exhaust System is constructed of 2-1/2" mandrel-bent aluminized steel tubing. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas...

aFe's all new Scorpion series cat-back exhaust system for your 2007- 2017 Toyota FJ Cruiser with the V6-4.0L engine will get you there with speed and style. Designed from 2-1/2" mandrel bent, aluminized steel, this exhaust system offers greater flow to...

aFe's all new Scorpion series cat-back exhaust system for your 2007- 2017 Toyota FJ Cruiser with the V6-4.0L engine will get you there with speed and style. Designed from 2-1/2" mandrel bent, aluminized steel, this exhaust system offers greater flow to...