Fabrication

This rotary file set is ideal for every technician. Be ready to elongate slots in Aluminum and Steel frames and brackets to accept larger offset cams. The kit includes one 85127 rotary file for steel and one 85137 rotary file for aluminum and cutting...

5/8" Rotary File. ......CAUTION: Always wear safety glasses when using cutting or grinding tools and equipment. California Residents WARNING

3/8" Rotary File. ......CAUTION: Always wear safety glasses when using cutting or grinding tools and equipment. California Residents WARNING

1/4" Rotary File. ......CAUTION: Always wear safety glasses when using cutting or grinding tools and equipment. California Residents WARNING

High quality carbide rotary files, ideal for elongating strut holes on many vehicles. Use when installing 82110, 82120,and 87350 adjusters. May be used with 1/4" or 3/8" drills at high speeds. Available individually. Use with 85774 Cool Tool...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Tool allows quick, precise and profitable adjustments of rear toe on both left and right sides of GM vehicles. California Residents WARNINGThis Part Fits:YearMakeModelSubmodel1998BuickRegal25th Anniversary...

This wrench is specifically designed to adjust the 86640 camber/caster kit. This steel wrench is plated for durability. California Residents WARNINGThis Part Fits:YearMakeModelSubmodel2003-2006FordExpeditionEddie Bauer2006FordExpeditionKing...

No-Mar coated jaws allow harmless removal and installation of chrome nut covers on light truck, motor home, and over-the-road truck lug nuts. California Residents WARNING

This tool for fine,accurate,easy adjustments of camber or caster on GM vehicles. No extra parts or cutting/grinding needed. California Residents WARNINGThis Part Fits:YearMakeModelSubmodel1979-1985BuickRivieraBase1982BuickRivieraLimited...

Removes tie rod ends with a straight, fast, firm pull. Makes installation of the 87330 camber/toe kit easier. It has a 2-1/4" reach adn a 2-1/2" spread. Also for pressing bushings. Replacement center screw with tip is part number 83707. California...

This heavy duty wheel weight tool has a special grip hammer and pliers for removal and installation of truck wheel weights. If you are using steel wheel weights, instead of lead wheel weights, this is the tool for you. California Residents WARNING

An excellent tool for fast camber-caster changes on most older Chrysler and Ford products w/SLA style suspensions California Residents WARNINGThis Part...

GM's HiPer strut has been released on several Buicks and Cadillacs. To adjust front camber you must adjust a cam bolt on knuckle assembly. However, GM is using torque-to-yield bolts which require replacement whenever an alignment is performed. Replace...

A must for every alignment tech, this spec book lists all major alignment angles for all vehicles from 2013-2023. Front caster, camber and toe, rear camber and toe, along with SAI and turning angle are presented in an easy to read format. Also included...

For quick and easy removal of indentations on wheel flanges and rims of most vehicles. Allows proper tire seating,giving greater tire protection and durability. This tool is powder coated for added durability. California Residents WARNING

For Rels Model SW504 Swing Arm- Rels Part # SW4236-15---- For Snap-On Models YA180,YA281---- 3 cut edges----positive rake for rotor & drum 10 bits per pack. California Residents WARNING

For Kwik Way Models SDL,DL,850 Disc Lathe,NDL,BDL,CBL----- Kwi-Lathe On-The-Car #108-0005-04 ROTUNDA,LINE-O-TRONICS---- Kwik-Way part# 109-1092-23---- Rels Model SW504 Swing Arm -Rels Part # SW4236-15---- For Snap-On Models YA180,YA281 -Snap-On Part #...

This 1/2" square drive impact socket is deep and thin walled to reach areas conventional sockets can't reach. Each socket provides two sizes. California Residents WARNING

This 1/2" square drive impact socket is deep and thin walled to reach areas conventional sockets can't reach. Each socket provides two sizes. California Residents WARNING

A must for proper alignments. This tool securely holds the steering wheel and it's covered hooks & base prevent damage to the steering wheel and seat.----------------------------- CAUTION: This product is not a locking device. Use only according to...

An adjustable steel plate extends the length of the bar to put constant pressure on the brake pedal. CAUTION: Use only according to directions packaged with product. California Residents WARNING

This tool is specifically designed for use on the Ford Super duty trucks as well as most other light trucks and vans as well. The extra long bar gives you maximum leverage to loosen rusted sleeves without injuring your knuckles. This 8 position tool...

The 76000 Mercedes C & E Class Rear Bushing Press Adapter Kit is designed for quick, easy removal of the OE rear control arm bushings and for the installation of the new adjustable camber bushings. This is a necessary kit for installing SPC's 28850 &...

This heavy duty 1" drive torque extension provides a fast, s imple method to achieve manufacturers' specified torque ever y time using an impact wrench. No more guesswork! This exten sion features solid one piece construction and has a lifetim e...

This heavy duty 1" drive torque extension provides a fast, s imple method to achieve manufacturers' specified torque ever y time using an impact wrench. No more guesswork! This exten sion features solid one piece construction and has a lifetim e...

160ft. lbs.-Orange-1/2" drive extension for: 1999 & up Ford Super Duty trucks and 2000-2005 extensions. California Residents WARNING

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Turn any 1/2" [12mm] hole into a precise and clean 8mm slot in your subframe clevis or axle brackets. The tool is designed to cut up to 10 ga mild steel. The low profile enables it to fit into spaces less than 1.5" [38mm]. Use this tool to quickly and...

Turn any 1/2" [12mm] hole into a precise and clean 14mm slot in your subframe clevis or axle brackets. The tool is designed to cut up to 10 ga mild steel. The low profile enables it to fit into spaces less than 1.5" [38mm]. Use this tool to quickly and...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

A necessary tool for removing the alignment inserts on the upper control arm alignment brackets without damaging the bracket. Includes a center punch for the older GM vehicles and the newer Jeep JK's and an offset punch for GM's newer models...

Save time and trouble when installing SPC's adjustable truck sleeves by using this double sided wrench. This wrench is specifically designed to be used with our 24220 and 24230 sleeves and makes on-the-truck adjustments a snap. California Residents...

Save time and money on pitman arm removal jobs with this heavy duty low-profile pitman arm puller tool. Made with forged steel jaws, the low profile design removes the need to remove the steering box. Specially designed for work on 3/4 & 1 ton trucks...

Designed to handle the toughest job,the 73119 is adjustable and has special forged jaws shaped to fit the job. Positive grip allows this tool to do many other pulling jobs Jaws open up to 2 1/8". CAUTION : NOT FOR USE WITH IMPACT WRECHES (AIR TOOLS)...

This tool is a must when servicing rebuildable ball joints from SPC. The 30mm spanner wrench has 5mm pins and is specifically designed for SPC's p/n 72610 Porsche arms and Builder Series of ball joints. The steel spanner features a 3/8" square drive to...

SPC aluminum panhard bars provide weight savings and adjustability! Manufactured from aircraft grade aluminum, precision TIG welded, and then black anodized, the SPC panhard bar is the lightest durable unit on the market. High durometer vulcanized rubber...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

These tie rod tools spread the tie rod adjusting sleeve for easier adjustment. You can use these tools with a breaker bar for additional power. With 1/2" drives. California Residents WARNING

These tie rod tools spread the tie rod adjusting sleeve for easier adjustment. You can use these tools with a breaker bar for addition power. With 1/2" drives. California Residents WARNING

This tie rod tool spreads the tie rod adjusting sleeve for easier adjustment. You can use these tools with a bracker bar for additional power. With 1/2" drives. California Residents WARNING

This kit includes part numbers 71959 through 71999. It will allow adjustment of most cars and light trucks and also includes the two larger adjusting tools needed for the new Ford Super Duty pickups. Tools have a 1/2" drive opening that allows the use...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Four position feature and 360deg rotation lets you grip the sleeve properly, even with limited access. Fits most passenger cars & light trucks. California Residents WARNING

For Hunter Model # 201,205--- Hunter Part # V302-07-167--- 12 cut edges ---- negative rake 10 bits per pack. California Residents WARNING

Find out your correct torquing specs quickly and easily with this handy chart. Referenced by both car/truck make/model/year and torque stick color, this chart is the quick guide all techs need. 13" x 14.75". California Residents WARNING

Red print on white base-1.5" X 5" vinyl sticker that proclaims you have the best in performance alignment. These stickers look great whether you use them for your windshield, side window or just to put on your tool box.

Easily and quickly remove and install rear trailing arm bushing in as little as 15 minutes per side vs. the factory "book" time of 1.8 hours per side. No need to remove the trailing arm from the vehicle or use a hydraulic press. California Residents...

This angle gauge is an easy, accurate way for measuring frame & drive shaft angles. An ideal tool to ensure the drive line angle is still within specification for raised & lowered vehicles.---------------------- Alignment equipment manufacturers are...

Our patented thrust alignment plate will allow for corrections of setback and thrust angle on most vehicles with rear leaf springs. Installation is made by loosening the U-bolts holding the leaf spring to the axle, installing the alignment plate...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Flange type axle puller can be used as a regular wheel puller or hub puller, as well as a flange type puller. The bolt circle range is from 4-1/2" to 5-1/2", which covers all cars and small trucks with flange type axles. The four slots allow this tool to...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

498 removes front hubs on vehicles with independent front suspensions. Remove screw and use it with 499 axle puller to remove axles in compact cars. 498 set includes 498-1, 498-2 and 498-3 California Residents WARNING

This wrench makes it easy to adjust the upper control arm cams on Chevy Express and GMC Savana vans. The tool surround surrounds the entire perimeter of each cam to provide a solid no slip means to move the hard-to-reach and often rusty OEM cams...

Aligning these trucks can be difficult because it is impossible to access the head of the cam bolt to adjust alignment angles. This special grooved socket fits over the end of the bolt allowing the technician to turn the alignment cams to change...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

This sleeve extracting rod fits into our 4434 C-Frame. The machined rod enables extraction of Toyota truck OE control arm cam sleeves that are often difficult to remove. The 44339 forcing rod can be used in your existing Specialty Products 40910 or 40920...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Thin walled spanner wrench designed specifically for installation and removal of O.E. and 23000 series screw in 4WD alignment sleeves. California Residents WARNING

This set safely removes and replaces GM,Ford and Chrysler wire wheel hubcap locks on 1978 and up vehicles. Variable drive keys will also fit Corvette,McGard hubcap locks and aftermarket wheel lug locks. Kit comes in durable plastic carrying case with...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Every alignment tech needs this tie rod wrench set in their tool box. Adjust inner tie rods with this easy to use 4 piece wrench set. The wrenches feature spring loaded toothed jaws and sturdy grips to make toe adjustments quick and easy. This set of...

FOR MODEL#S 67BSD,67DLX,67GSA,69DXL,701ECF,601PF--- FMC or Barrett 400,500,700 Hoffmann/RJ West True-Cut 400/401 OEM Part # 90488--- Perfect Equipment Models 400 & 450 Twin Turn ---3 cut edges---positive rake with .020 radius. Left & Right hand tool...

For Model #s 67BSD,87DLX,67GSA,69DLX,701ECF,601PF--- FMC OR Barett 400,500,700 Hoffmann/RJ West True Cut 400/401 Hoffmann/RJ West part# 722-83-4--- Perfect Equipment Model # 400 & 450 Twin Turn -Part # W139 ---3 cut edges---positive rake with .020 radius...

For model #s 67BSD,67DLX,67GSA,69DLX,701ECF,601PF--- FMC or Barrett model 400,500,700--- OEM Part#90487 Hoffmann/RJ West part#722-83-4--- Perfect 400 & Twin Turn-Perfect Part # W139---3 cut edges ---positive rake with .020 radius. Left & Right hand...

A handy chromoly steel compressor designed to fit inside most coil springs with an internally mounted shock. Will accomodate spring lengths from 8-1/4" to 14". It can be used on any coil spring with a minimum inside diameter of 3-3/8" to a maximum...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

When used with #499, this tool will pull most CV joints that use a hidden snap ring to hold them in the transaxle. Made to remove the transaxle assembly without damaging the transmission case or inside roller bearing. California Residents WARNING

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

This master balljoint separator set from SPC is a must for any technician replacing balljoints, control arms, or tie rod ends on today's car and SUV's. With 4 different opening sizes ( 24mm, 27mm, 31mm, 36mm ) a threaded height adjustment and 2 different...

Stop damaging steering knuckles by removing linkages or struts with pry bars, screwdrivers and hammers. Use the Steering Knuckle Spreader Tool to make quick work of tight and corroded steering knuckles by simply turning the threaded wedge assembly...

Use this tool to safely and easily expand steering knuckles. Pry bars can damage the knuckle, but this tool allows safe expansion with the tool adjustment nut. Designed to operate within a 4.4 - 10mm range, this expansion tool will fit most makes and...

The best tool for removing or installing passenger car and light truck wheel weights. Incorporates hooks for removal of wheel weights on many different types of wheels. Not for use on aluminum or decorative wheels. California Residents WARNING

Camber change on the 2007 and up Sprinter van is quick, easy and locked in with this SPC cam kit. Get up to +- 3.0deg camber change by simply removing the upper OE bolt, loosening the lower bolt, installing and adjusting this cam kit to the desired...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.