BMR Suspension

Designed to fit 2005-2014 S197 Mustang;Lighter than competitors K-members;Manufactured from 1-inch, 1-1/4-inch, and 1 ?-inch DOM tubing;Works with stock A-arms or BMR A-arms;Give you a 20-pound...

Designed to fit 2005-2014 S197 Mustang;Lighter than competitors K-members;Manufactured from 1-inch, 1-1/4-inch, and 1 ?-inch DOM tubing;Works with stock A-arms or BMR A-arms;Give you a 20-pound...

BMR 05-14 S197 Mustang Non-Adj. Boxed Lower Control Arms (Polyurethane) - Black Hammertone

Fits all 2005-2014 S197 Mustangs (including V-6 and GT500);Designed to OEM length with OEM rear offset;High-durometer internally fluted polyurethane greasable bushings;MIG-welded 1x2-inch square-tube...

BMR 05-14 S197 Mustang Non-Adj. Boxed Lower Control Arms (Polyurethane) - Red

Fits all 2005-2014 S197 Mustangs (including V-6 and GT500);Designed to OEM length with OEM rear offset;High-durometer internally fluted polyurethane greasable bushings;MIG-welded 1x2-inch square-tube...

A Panhard rod is a suspension link that both locates the rear axle housing laterally and controls side-to-side movement. Factory S197 Mustang Panhard rods are made from weak U-shaped stamped steel...

A Panhard rod is a suspension link that both locates the rear axle housing laterally and controls side-to-side movement. Factory S197 Mustang Panhard rods are made from weak U-shaped stamped steel...

BMR 05-14 S197 Mustang On-Car Adj. Lower Control Arms / Rod End Combo (Poly) - Black Hammertone

BMR 05-14 S197 Mustang On-Car Adj. Lower Control Arms / Rod End Combo (Polyurethane) - Red

A Panhard rod is a suspension link that both locates the rear axle housing laterally and controls side-to-side movement. Factory S197 Mustang Panhard rods are made from weak U-shaped stamped steel...

A Panhard rod is a suspension link that both locates the rear axle housing laterally and controls side-to-side movement. Factory S197 Mustang Panhard rods are made from weak U-shaped stamped steel...

BMR 05-14 S197 Mustang Radiator Support Chassis Brace - Black Hammertone

BMR 05-14 S197 Mustang Radiator Support Chassis Brace - Red

BMR 05-14 S197 Mustang Radiator Support w/ Sway Bar Mount - Black Hammertone

BMR 05-14 S197 Mustang Radiator Support w/ Sway Bar Mount - Red

BMR 05-14 S197 Mustang Radiator Support w/o Sway Bar Mount - Black Hammertone

BMR 05-14 S197 Mustang Radiator Support w/o Sway Bar Mount - Red

Hard launches from high horsepower cars at the drag strip require more that just a normal street-style sway bar. BMR Suspension's Xtreme Anti Roll Bar for 2005-2014 Mustang or 2007-2014 Shelby GT500...

Fits all 2005-2014 Mustangs and 2007-2014 Shelby GT500s;Designed for street performance and drag race applications;Dramatically reduces body roll;Up to 4,090% increase is sway bar rate over stock...

Fits all 2005-2014 Mustangs and 2007-2014 Shelby GT500s;Designed for street performance and drag race applications;Dramatically reduces body roll;Up to 4,090% increase is sway bar rate over stock...

Fits 2005-2014 V6/V8 Ford Mustang and 2007-2012 Ford Shelby GT500;Rear Driveshaft Loop;Bolt-on design;No fabrication needed;Complies with NHRA rules;Required for cars quicker than 13.99 in the...

BMR 05-14 S197 Mustang Sway Bar Relocation Kit - Bare

BMR 05-14 S197 Mustang Upper Panhard Rod Support - Black Hammertone

BMR 05-14 S197 Mustang Upper Panhard Rod Support - Red

BMR 05-14 S197 Mustang V8 w/ Plenum Cover Strut Tower Brace - Black Hammertone

BMR 05-14 S197 Mustang V8 w/ Plenum Cover Strut Tower Brace - Red

Lowers your GT500 approximately 1.5-inches;165 lb/inch front linear rate spring;160 lb/inch rear dual-rate spring;Designed for drag race applications;Manufactured from chrome silicon high-tensile...

Fits 2007-2014 Shelby GT500;Bolt-on design;No fabrication needed;Complies with NHRA rules;Required for cars quicker than 13.99 in the quarter mile with sticky tires;Required for cars quicker than 11...

Lowers your GT500 approximately 1-inch;220 lb/inch front linear spring rates;200 lb/inch rear dual-rate rear spring;Improves handling and ride quality;Lower center of gravity;Decreased body...

Fits Pontiac G8;Designed for street performance, autocross, and road race applications;Dramatically reduces body roll;87%-137% increase (front), 91%-286% increase (rear) in sway bar rate ;Cold formed...

Fits Pontiac G8;Designed for street performance, autocross, and road race applications;Dramatically reduces body roll;87%-137% increase (front), 91%-286% increase (rear) in sway bar rate ;Cold formed...

Fits Pontiac G8;Designed for street performance, autocross, and road race applications;Dramatically reduces body roll;87%-137% increase in sway bar rate;Cold formed to better resist torsional...

Fits Pontiac G8;Designed for street performance, autocross, and road race applications;Dramatically reduces body roll;87%-137% increase in sway bar rate;Cold formed to better resist torsional...

BMR 08-09 Pontiac G8 Front Strut Mount Bushing Kit (Elastomer) - Black

BMR 08-09 Pontiac G8 Front Strut Tower Brace - Black Hammertone

BMR 08-09 Pontiac G8 Front Strut Tower Brace - Red

Fits 2008-2009 Pontiac G8 (GT only);Designed for street performance, drag race, and handling applications;Replaces the factory rear lower control arm bushings (outer);Manufactured from 95-durometer...

BMR 08-09 Pontiac G8 Rear Cradle Street Version Bushing Kit (Elastomer) - Black

Fits Pontiac G8;Designed for street performance, autocross, and road race applications;Dramatically reduces body roll;91%-286% increase is sway bar rate over stock sway bar (depending on year and...