aFe

The new Bladerunner manifold kit for the popular 7.3L Power Stroke is constructed of cast A356-T6 aluminum and features the patented MDV (Multiple Directional Vane) technology which helps increase...

The aFe Bladerunner Turbo Inlet Manifold increases performance to your Duramax by 23hp and 57lbs x ft. torque while increasing air flow 73-percent over the factory turbo inlet. The Bladerunner turbo...

The aFe Bladerunner Turbo Inlet Manifold increases performance to your Duramax by 9hp and 23lbs x ft. torque. The Bladerunner turbo inlet manifold also improves turbo spool up times and lowers...

aFe Power is proud to introduce the square body direct replacement Oil Cooler for 2003-2007 V8-6.0L (td) Ford Powerstroke trucks. This unit includes all necessary hardware needed for the removal and...

Bolt on instant performance by upgrading or replacing your restrictive, cracked factory manifold with this BladeRunner port matched manifold. Designed to outflow the stock manifold by 12% for...

Bolt on diesel power with aFe's BladeRunner exhaust manifolds for your 08-10 6.4L Powerstroke. These ported ductile iron manifolds will reduce pressure loss to your turbocharger for increased...

Smooth transitions in the mandrel-bent aluminum tubing decrease turbulence and minimize pressure loss, increasing horsepower and torque. This pipe kit includes high-quality, stainless-steel,...

Bladerunner Intercoolers represent the next generation of intercoolers. The Bladerunner intercoolers utilize a 3 in. bar and plate design that out performs OE style tube and fin core designs. The...

BladeRunner Silicone Radiator Hose Kit Dodge Diesel Trucks 03-09 L6-5.9/6.7L (td)This Part Fits:YearMakeModelSubmodel2003,2005-2009DodgeRam 2500Laramie2003-2009DodgeRam 2500SLT2006-2007DodgeRam...

aFe BladeRunner Silicone Radiator Hose Kit 12-18 Jeep Wrangler (JK) V6 3.6L - BlackThis Part Fits:YearMakeModelSubmodel2016JeepWrangler75th...

Bladerunner Intercoolers represent the next generation of intercoolers. The Bladerunner intercoolers utilize a 3 in. bar and plate design that out performs OE style tube and fin core designs. The...

This BladeRunner Street Series Radiator features a 2-1/4" thick tube and fin core which provides greater heat dissipation and better coolant flow than the factory radiator for optimum cooling...

Oversized Tube and Fin Core: This BladeRunner Street Series Radiator features a 2-3/4" thick tube and fin core which provides greater heat dissipation and better coolant flow than the factory...

Oversized Tube and Fin Core: This BladeRunner Street Series Radiator features a 2" tube and fin core which provides greater heat dissipation and better coolant flow than the factory radiator for...

Oversized Tube and Fin Core: This BladeRunner Street Series Radiator features a 2-3/4" thick tube and fin core which provides greater heat dissipation and better coolant flow than the factory...

BladeRunner Street Series Radiators feature a thicker tube and fin core, which provides greater heat dissipation and better coolant flow than the factory radiator for optimum cooling efficiency. With...

When it comes to engineering for power, performance, protection and value, aFe POWER is the only choice.

Both turbos feature a gold anodized 7/14 bladed billet aluminum compressor wheel that is lighter and stronger than the stock cast wheel to help provide quicker "spool-up" and higher air flow than the...

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need...

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need...

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need...

Introducing the all new aFe Power BladeRunner Wastegate Actuator for the Dodge Diesel Trucks 03-07 L6-5.9L(td). Constructed out of black anodized CNC T6061 billet aluminum for maximum strength and...

This Stage 2 air intake system produces 15 max horsepower, 20lbs. x ft. torque and out-flows the factory intake by 41%. Includes a massive air filter, and a one-piece heat shield that requires no...

Enhance your Tundra’s handling performance and style with the all-new aFe CONTROL Upper Control Arms. Although the factory control arms may be adequate with most front lift kits, the appearance of...

aFe CONTROL Leveling Kits are made from 6061 billet aluminum and provide a 1.875-Inch lift in the front to provide better off-road performance while also eliminating the “nose-down rake” notorious on...

Stiffen up your chassis and give your engine bay a unique look with our aFe Control fabricated Strut Tower Bar. Made with Gunmetal Gray Powder-coated Steel, the Single Tube design is MIG welded to...

aFe CONTROL Ride Height Simulator modules are a simple plug and play connector that allows installation of aftermarket lowering or lift kits that change vehicle ride height more than 1”. These work...

Made with high quality Aurora rod ends and precision machined adjusters, these end links will make short work of dialing in your suspension. Joint articulation was designed to exceed factory range...

aFe CONTROL Leveling Kits are made from 6061 billet aluminum and provide a 2.0-Inch lift in the front to provide better off-road performance while also eliminating the “nose-down rake” notorious on...

aFe CONTROL Leveling Kits are made of 6061 billet aluminum and provide a 2.0-Inch lift in the front to provide better off-road performance while also eliminating the “nose-down rake” notorious on...

aFe CONTROL Leveling Kits provide improved ground clearance while also eliminating the “nose-down rake” notorious on stock trucks. High quality hardware is used for strength and durability...

aFe CONTROL Leveling Kits. are made of 6061 billet aluminum and provide a 2.0-Inch lift in the front to provide better off-road performance while also eliminating the “nose-down rake” notorious on...

aFe CONTROL Leveling Kits are made from 6061 billet aluminum and provide a 2.5-Inch lift in the front to provide better off-road performance while also eliminating the “nose-down rake” notorious on...

Made with high quality Aurora rod ends and precision machined adjusters, these end links will make short work of dialing in your suspension. Joint articulation was designed to exceed factory range...

aFe CONTROL Front Suspension Strut Brace is designed to stiffen up your chassis and dress up your engine bay. By reducing chassis flex and deflection, the suspension is better able to do its job...

aFe Control is proud to introduce the PFADT Series Heavy Rate Racing Sway Bar Front Service Kit for the 1997-2013 C5 & C6 Corvette. Corvette race cars see lots of action and this kit includes the...

aFe Control is proud to introduce the Sway Bars for the 2015-2020 Ford Mustang (S550). Anyone can make a stiff sway bar, but at aFe Control we provide you with the perfect balance by pairing the...

Stiffen up your chassis and give your engine bay a unique look with our aFe Control fabricated Strut Tower Bar. Made with Gunmetal Grey Powder-coated Steel, the Dual Tube Truss design is MIG welded...

Dramatically reduce body roll without sacrificing ride quality with the aFe CONTROL Tundra rear sway bar. Our 3-way adjustable sway bar will allow you to easily dial in the handling balance of your...

aFe CONTROL is proud to introduce the all-new line of aFe CONTROL Leveling Kits. These billet aluminum leveling spacers provide a 2.0-Inch lift in the front to provide better off-road performance...