SPC Performance

Change camber,caster, or both on twin traction beam Dana 44s with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve...

Ford changed the axle design in 2005 on their Heavy Duty trucks. These sleeves correct camber and caster on these F250 and F350 Super Duty trucks. Use the 23229 zero degree sleeve to determine the...

These truck sleeve will correct alignment problems on the F450 and F550 Super Duty trucks with Dana Super 60 solid axles. To split camber and caster adjustment, rotate sleeve 45° Use the 23239 zero...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Replace frozen or worn lower control arm bolts with SPC's replacement adjusters. Designed for the rigors of Ram heavy duty trucks, these high strength bolts come with a corrosion resistant coating...

Adjust camber in the rear of many popular VW and Audi models ±3° with this fully adjustable rear camber arm from SPC. The forged steel arm and double threaded adjuster offer the strength and on-car...

Quickly restore lost adjustment due to frozen or broken adjusters with this rear toe adjustment cam from SPC. This cam is designed to fit a wide variety of latemodel Hyundai and Kia vehicles and is...

Quickly restore lost adjustment due to frozen or broken adjusters with this rear camber adjustment cam from SPC. This cam is designed to fit a wide variety of latemodel Hyundai and Kia vehicles and...

Quickly restore lost adjustment due to frozen or broken adjusters with this rear toe adjustment cam from SPC. This cam is designed to fit a wide variety of latemodel Hyundai and Kia vehicles and is...

Replace corroded or damaged original equipment alignment cams on GM 2500/3500/4500 HD trucks and Chevy Colorados with this cam and bolt kit. SPC's replacement camber & caster cam kit includes a...

Replace a word or bent rear lateral arm (OEnumber 551201MA0D) on the Infiniti Q50 and Q70 with SPC's high strength steel stock length control arm. Need toe adjustment? Consider SPC adjustable link...

Add permanent adjustability to the front end of the rear wheel drive Dodge Charger, Challenger, and Chrysler 300 vehicles with this cam bolt kit. The kit includes one camber cam and one caster cam to...

This Dodge Ram HD tie rod adjuster is hex-shaped to allow easy and precise toe adjustments without rounding and slipping on the factory adjuster. Part number 23610 fits Dodge Ram HD manufactured...

By installing these cam bolts in the LOWER BOLT POSITION on the 2-bolt front strut assembly of this popular platform, you can dial in front camber adjustments. US Patent Nos. 8,544,861 8,469,375...

Replace a worn or bent rear lower control arm (OEnumber 551A01MA0D) on the Infiniti Q50 and Q70 with SPC's high strength stell stock length control arm. Need camber adjustment? Consider SPC...

Use this fixed change shim to adjust rear toe on the Fiat 50 0 -.13¦. Need camber change too? Stack a camber shim with this toe shim. See camber shims 71781-71784. Do you see a lot of Fiat 500s?...

Use this fixed change shim to adjust rear toe on the Fiat 500 -.38°. Need camber change too? Stack a camber shim with this toe shim. See camber shims 71781-71784. Do you see a lot of Fiat 500s?...

Fix your rear toe on Hyundai Accent and Kia Rio models with this shim set from SPC. Fix tire wear, thrust angle, and poor drivability by getting the rear toe back into specification. This kit...

Fix your rear toe and Hyundai Accent and Kia Rio models with this ±.38° shim from SPC. Fix tire wear, thrust angle, and poor drivability by getting the rear toe back into specification. Work on a lot...

Install this cam and guide kit to quickly and accurately dial in camber on Jeep Grand Cherokee SRT8 and Trackhawk models. Even with the suspension loaded, this kit makes changes of up to +-1.5deg...

This Dodge Ram HD tie rod adjuster is hex-shaped to allow easy and precise toe adjustments without rounding and slipping on the factory adjuster. Part number 23615 fits Dodge Ram HD manufactured afer...

Turn any 1/2" (12mm) hole into a precise and clean 14mm slot in your subframe clevis or axle brackets. The tool is designed to cut up to 10 ga mild steel. The low profile enables it to fit into...

Turn any 1/2" (12mm) hole into a precise and clean 8mm slot in your subframe clevis or axle brackets. The tool is designed to cut up to 10 ga mild steel. The low profile enables it to fit into spaces...

Replace the non-adjustable rear upper control arm on the Nissan Altima with SPC's fully adjustable arm to get ±2.5° of camber change. This remove and replace arm is perfect for traditional alignment...

Take advantage of SPC's extended cam kit to double the rear toe adjustment range on many Civic, CR-V and ILX models. Some increase can be gained by simply installing the kit, but using a rotary file...

Get ±3° of camber adjustment on your late model BMW or Mini with this rear camber arm from SPC. Whether you need to improve tire life, add aggressive camber settings for the track, or just want a...

Add rear camber adjustment to your Toyota Highlander or Lexus RX with this adjustable camber arm. With +-3deg of adjustment, this arm will get your vehicle back into factory specification to ensure...

Turn any 9/16" (14 mm) hole into a precise and clean 16mm slot in your subframe clevis or axle brackets. The tool is designed to cut up to 10 ga mild steel. The low profile enables it to fit into...

Replace the rear camber and toe links on your S550 Mustang with SPC's forged aluminum adjustable links and be confident you will have the most change and lightest weight, with uncompromised strength...

Upgrade your rear suspension for added toe adjustment and reduced weight vs the OE link with this adjustable aluminum control arm from SPC. This lower arm features a xAxis sealed flex joint that...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Get your 10th generation Civic ready for the track with SPC's forged aluminum adjustable rear camber arm. SPC forged aircraft grade aluminum arm weights less than the OE arm it will replace. The arm...

Extend your toe adjustment range on the rear of many popular Honda models. SPC's extended toe cam kit will allow you to get a full ±2.5° of toe change. This cam bolt features a hex chromate free...

Get ready for the track with this four (4) arm set of adjustable upper links for the Audi B9 platform. This kit has four arms so you can change camber and caster ±1.5° on both sides. xAxis sealed...

The upper control arm ball joint pinch bolt on the popular Audi A4 and A5 models is frequently corroded and must be cut out when removing or replacing the upper arms. This bolt and nut replacement...