Radium Engineering

Single catch can kit for Mitsubishi Evolution X. Interfaces with crankcase ventilation hose (from valve cover). Easy bolt-in installation.

Drop-in fuel pump hanger for GM vehicles (Cadillac CTS, Camaro, etc). Can be used with one or two aftermarket high-flow fuel pumps (not included). Check website for fuel pump compatibility. Retains...

Aluminum fuel pump access cover for the 2008-2015 Cadillac CTS(all). Requires drilling/cutting for installation. See website for more details.

Comprehensive fuel plumbing kit for use with the Radium in-tank fuel pump hanger for the Cadillac CTS-V. Includes all PTFE fuel lines, fuel filter with stainless steel mesh element, pressure...

Radium Engineering 08-16 Mitsubishi EVO X Alternate Mount For Crankcase Catch Can KitThis Part Fits:YearMakeModelSubmodel2015-2019FordF-150King...

Provides all necessary hose, fittings, and hardware to convert the OEM Evo X fuel feed line to be used as the return lineThis Part Fits:YearMakeModelSubmodel2015MitsubishiLancerEvolution Final...

Fuel pressure gauge kit includes 8AN ORB to 1/8NPT female adapter and a 90 degree M/F 1/8NPT elbow fitting.

Bolts to underside of car to support aftermarket fuel lines. Same as brackets used in Radium fuel plumbing kit 20-0529-0X.

Radium Engineering 08-21 Subaru WRX STi (EJ257 Only) RA-Series Fuel Pressure Regulator KitThis Part Fits:YearMakeModelSubmodel2015-2021SubaruWRX STIBase2015SubaruWRX STILaunch...

Single catch can kit for the Nissan R35 GT-R. Interfaces with the PCV valve line. Easy bolt-in installation.

Single oil catch can kit for the Cadillac CTS-V (LSA engine). Interfaces with crankcase vent line to filter oil out of the blow-by gasses and keep the induction system clean. Easy bolt-in...

Radium Engineering 1/2in SAE Male to 6AN Male

Push to connect tube fitting for Radium fuel pressure regualtors. Replaces the hose barb fitting.

Converts 1/8NPT male to 3/16 barb 90 degree; Aluminum, black anodized

Radium Engineering 1/8in NPT Male to Female 90 Degree Fitting

High-flow fuel filter with built-in check valve. Equipped with a 10 micron stainless steel mesh filter element. 10AN ORB female ports.

10 micron filtration; Gas, Diesel, E85, Ethanol, Methanol compatible; Reusable element

Dual catch can kit for the Lotus Evora, MY2010 and up. Easy bolt-in installation. Keeps oil and other contaminants out of the air induction system.

100 micron filtration; Gas, Diesel, E85, Ethanol, Methanol compatible; Reusable element

Reusable black anodized aluminum Push-Lok hose ends.

10AN tee fitting adapter; -AN Male to -AN Female with 1/8" female NPT Female threads; Commonly used to install a sensor or gauge inline with a -AN hose

Press fit swiveling low profile -AN adapter. Commonly used in valve covers. Stainless steel body with anodized aluminum swiveling -10AN male fitting.

CNC machined aluminum and laser engraved. Stainess steel press in portion. Swivels after installation.This Part Fits:YearMakeModelSubmodel1993-1998ToyotaSupraBase1993-1998ToyotaSupraTwin Turbo

Press in fitting that swivels after installation. 10AN male. Made for 17.5mm hole.

CNC machined aluminum and laser engraved. Stainess steel press in portion. Swivels after installation.This Part Fits:YearMakeModelSubmodel1993-1998ToyotaSupraBase1993-1998ToyotaSupraTwin Turbo

Converts 10AN ORB to 10AN male fitting; To be used with -AN hoses and fittings

Swiveling low profile adapter fitting. Screws into 10AN ORB port and provides 12AN male flare. Stainless steel and aluminum construction.

Machined aluminum; Black anodized; high strength double-layed cotton filtration element

Swiveling low profile fitting. Screws into a 10AN ORB female port and has a 10mm hose barb swivel.

Swivel fitting. Stainless steel and aluminum construction. Screws into a 10AN ORB (O-ring port) and has a swiveling 6AN male flare fitting.

Catch can fitting with integrated steel ball. This valve closes when inverted to prevent oil loss out of the fitting in case of an accident. Aluminum construction. Black anodized color.

Radium Engineering 10AN ORB to 3/8in SAE Male

Radium Engineering 10AN ORB to 5/16in SAE Male Fitting

Converts 10AN ORB to 6AN male fitting; To be used with -AN hoses and fittings

Inline swiveling fitttting. Male 10AN ORB and Male 6AN ORB provided. O-rings included.

Suitable for all types of rubber hose with 3/8" (8-10mm) inside diameter; Hose clamps are recommended

Suitable for all types of rubber hose with 1/2" (12-14mm) inside diameter; Hose clamps are recommended

Suitable for all types of rubber hose with 5/8" (15-17mm) inside diameter; Hose clamps are recommended

Suitable for all types of rubber hose with 3/4" (18-20mm) inside diameter; Hose clamps are recommended

10AN male (7/8-14) threads and large 12.4mm (1/2") internal diameter for optimal flow; Can be used as a weld-in or press-in fitting