Radium Engineering

Reusable black anodized aluminum Push-Lok hose ends.

Converts 10AN ORB to 8AN male fitting; To be used with -AN hoses and fittings

10AN PTFE hose and hose-end fittings. 14.7 feet of hose (4.5m). Two straight hose ends, two 90 degree hose ends and two 45 degree hose ends. This hose is compatible with all types of automotive...

Internal wire harness for Walbro F90000267/274/285 pumps, with ring terminals.

CNC machined Aluminum; Laser etched and anodized; Stainless steel hardware; low-profile design; two chamber design with two cross over passages; internal swirl featureThis Part...

Radium Engineering 12AN Female Fitting to Air Filter

Complete bolt-in kit; Contains all necessary parts for installation, plumbing and powering the surge tank pump; excellent way to add more pump capacity to the vehicleThis Part...

CNC machined Aluminum; Laser cut mounting bracket; Stainless steel hardware; low-profile design; two chamber design with two cross over passages and internal swirl featureThis Part...

Radium Engineering 13+ Scion FR-S / Subaru BRZ Master Cylinder Brace - BlackThis Part...

Radium Engineering 13+ Scion FR-S / Subaru BRZ Master Cylinder Brace - GreenThis Part...

All 8 ports are threaded for 8AN ORB; Accomodates factory sensors; CNC machined Aluminum; Laser etched and anodized; Stainless steel hardwareThis Part...

Allows connection of the Radium fuel rail 20-0111-02 to the factory fuel system.This Part...

Easy bolt-on installation; Has two -10AN ORB ports; CNC machined Aluminum; Laser etched and anodized; Stainless steel hardware; Includes 10AN ORB plug and PCV valveThis Part...

Single catch can kit for the 2015-2018 Ford Focus ST. Interfaces with the crankcase vent line. Easy bolt-in installation. Includes Radium's Fluid Lock catch can (patent pending).This Part...

Bolt-in catch can kit for the 2015-2020 Ford F150 and F150 Raptor with Ecoboost V6 engines. Interfaces with the PCV hose to filter contaminants out of the intake air for cleaner combustion and better...

Direct OEM-style fitment; Replaces OEM fuel filter; Stainless steel hardware; No cutting or drilling is requiredThis Part Fits:YearMakeModelSubmodel2016-2017FordFocusRS

CNC machined Aluminum; Laser etched and anodized; Stainless steel hardware

CNC machined Aluminum; Laser etched and anodized; Stainless steel hardware

Dual catch can kit for the Nissan 370Z (all years, all trim levels). Easy bolt-in installation and integrates with factory components.

Designed for OEM injector fitment. 8AN ORB Ports. Compatible with all Ford V8 Coyote variants including 2018MY.This Part Fits:YearMakeModelSubmodel2011-2018FordMustangGT2015FordMustangGT 50 Years...

CNC machined Aluminum; Laser etched and anodized; Stainless steel hardwareThis Part Fits:YearMakeModelSubmodel2013-2017FordFocusST

Adds port injection to the EcoBoost engine; CNC machined Aluminum; Laser etched and anodized; Stainless steel hardware; E85 compatibleThis Part...

Fuel rails for the FA20 engine found in the Suabru BRZ, Scion FR-S and Toyota 86.This Part...

Increased engine performance from cleaner inlet air; Prevents oil buildup; Lowers hydrocarbon emissions; Heated with engine coolant; Bolt-in installationThis Part...

Laser cut and formed 5052 aluminum; Black anodized; Permits easier access to the RH side of the engine; Ideal for use with Radium fuel rail kitThis Part...

CNC machined Aluminum; Laser etched and anodized; Stainless steel hardware; low-profile design; two chamber design with two cross over passages; internal swirl featureThis Part...

The Radium air/oil separator traps blow-by oil before it can be sent back to the induction system. The collected oil is heated by the AOS to remove moisture, then allowed to drain back into the...

Increased engine performance from cleaner inlet air; Prevents oil buildup; Lowers hydrocarbon emissionsThis Part Fits:YearMakeModelSubmodel2015-2019FordF-150King...

Replaces OEM fuel feed tube on the firewall to the engine; Uses PTFE hosing compatible with all fuel typesThis Part...

CNC machined Aluminum; Laser etched and anodized; Stainless steel hardwareThis Part...

6061 machined aluminum and black anodized; Converts 3/8 BSPT to -10AN male fitting; Common pcv delete fitting for Subaru FA20 and Toyota 4U-GSE enginesThis Part...

Dual catch can kit for the 2016+ Toyota Tacoma. Oil catch cans interface with both the crankcase vent line and PCV line. Catch cans collect oil that would otherwise end up in the intake system and...

Single catch can kit for the 2016+ Toyota Tacoma. Interfaces with the PCV valve line and helps keep oil and contaminants out of the induction system. Easy bolt-in installation.

Offers a solution for adding more fueling capability to the Honda K20C1 engine. Installs between the intake manifold and the head. Fuel rail included.This Part...

Single catch can kit for the 2022+ Subaru BRZ and Toyota GR86. Interfaces with the PCV valve line and installs the catch can in the RH corner of the engine bay. RH drive vehicle compatible.This Part...

Radium Engineering 3 Into 1 Distribution Block w/ Fittings

Radium Engineering 3/8in SAE Female To 3/8in Barb Quick Connect Fitting

Low profile adapter for SAE quick-connect lines. 90 degree elbow, converts to 6AN male. Compatible with all fuel types.

CNC machined Aluminum; Black and Green anodized; Stainless steel hardware; Low-profile design

CNC Machined from steel and then zinc plated. Compatible with any 3/8 SAE quick connect female fitting.