Radium Engineering

Reusable black anodized aluminum Push-Lok hose ends.

Leak-free disengagement while retaining pressure; Simple push and twist operation

Leak-free disengagement while retaining pressure; Simple push and twist operation

8AN tee fitting adapter; -AN Male to -AN Female with 1/8" female NPT Female threads; Commonly used to install a sensor or gauge inline with a -AN hose

CNC machined aluminum with anodized finish. O-ring sealed. Swivels after installation.

Radium's redesigned direct mount EFI fuel pressure regulator is new for 2020 and has many new improvements. The regulator mounts with a new swiveling fitting. The regulator has two 1/8NPT ports that...

CNC billet aluminum round plug; Uses internal hex

Low-profile swiveling fitting. Scews into 8AN ORB female port and has a 10mm hose barb swivel.

Stainless steel and aluminum construction. Screws into a 8AN ORB port and provides a swiveling 6AN female.

Converts -8an to 1/8NPT; Commonly used for installing a fuel pressure gauge or pressure sensor; *always use PTFE tape or paste on NPT threads*

Adapter fitting. 8AN ORB male to 10mm hose barb male. Aluminum.

Converts 8AN ORB to 6AN male fitting; To be used with -AN hoses and fittings

Converts 8AN ORB to 8AN male fitting; To be used with -AN hoses and fittings

Radium Engineering 8AN ORB to M12X1.5 Female Fitting

Reusable black anodized aluminum Push-Lok hose ends.

8AN PTFE hose and hose-end fittings. 14.7 feet of hose (4.5m). Two straight hose ends, two 90 degree hose ends and two 45 degree hose ends. This hose is compatible with all types of automotive...

Single catch can kit for the 1990-2005 Mazda MX-5 Miata. Can be used on either PCV line or crankcase vent hose. Easy bolt-in installation. See website for more details. Includes Radium's Fluid Lock...

Dual catch can kit for the 1990-2005 Mazda MX-5 Miata. Interfaces with both the PCV and crankcase vent lines. Easy bolt-in installation. Includes Radium's Fluid Lock catch can (patent pending).This...

CNC machined Aluminum; Laser etched and anodized; Stainless steel hardwareThis Part Fits:YearMakeModelSubmodel1993-1998ToyotaSupraBase1993-1998ToyotaSupraTwin Turbo

CNC machined aluminum and anodized black. Mounts to frame rail using pre-existing holes.This Part Fits:YearMakeModelSubmodel1993-1998ToyotaSupraBase1993-1998ToyotaSupraTwin Turbo

Mounting bracket and hardware for installing a Radium Engineering fuel filter on the rear subframe of the FD RX-7. Filter sold separately.

Kit to add a second pump to the Radium in-tank fuel hanger for Honda applications. Compatible with Radium kit number 20-0790-00.

Radium Engineering 94-01 Acura Integra/ 92-00 Honda Civic Fuel Hanger For Walbro F90000267/274/285This Part...

In-tank fuel pump hanger for the Civic and Integra. For use with Walbro GSS342 or AEM 50-1000/1200 pumps (or similar).This Part...

Equipped with three 8AN ORB ports; CNC machined Aluminum; Laser etched and anodized; Stainless steel hardwareThis Part Fits:YearMakeModelSubmodel1999MazdaMiata10th...

Permits a bolt-on plug and play replacement for the OEM system; OEM fuel pressure regulator is retained. Feed and return hoses are replaced.This Part...

Single catch can kit for the Toyota 1996-2001 JZX Chaser/MarkII/Cresta. Includes special mounting bracket, hoses and fittings for a complete installation. Can be used with engine swapped vehicles.

Permits a bolt-on plug and play replacement for the OEM system when using the Radium Engineering fuel rail for the MX-5/Miata. OEM fuel pressure regulator is retained. Feed and return hoses are...

Pack of 15 aluminum acorn nuts. 10-32 thread. Non conductive. For use with Radium electrical studs.

Radium Engineering Adapter Fitting M12X1.5 to 6AN

Adjustable set point; stainless steel body; 1/8" NPT male port

Air filter for 3/4" connections. Hose clamp included.

Increased engine performance from cleaner inlet air; Prevents oil buildup; Lowers hydrocarbon emissions

Fuel surge tank installation kit for Radium 20-0960 FST. Includes all parts necessar for a comprehensive installation the BMW E46 chassis (excluding convertible).

Radium Engineering BMW E46 M3 (S54) Fuel Rail Kit (Does Not Include Hose or Fittings)This Part Fits:YearMakeModelSubmodel2001-2006BMWM3Base2001-2002BMWZ3M Coupe2001-2002BMWZ3M Roadster2006-2008BMWZ4M...

Single catch can kit for the E46 BMW M3. Fittings and hoses included. Easy bolt-in installation.This Part Fits:YearMakeModelSubmodel2001-2006BMWM3Base

Drop-in billet fuel pump hanger for BMW E9x models and similar. Can hold up to two aftermarket fuel pumps. Collector box and built-in pressure regualtor included. Fuel pumps sold separately...

Surge tank system that mounts insided of OEM BMW fuel tank. Factory fuel pump acts as lift pump to feed surge tank. Surge pumps then feed the engine. Excellent way to add more pump capacity while...

Bolt-on fuel rail kit for the BMW M50/M52/M54/S50/S52 engines. One kit works on all engines listed. Three 8AN ORB ports. E85 compatible. Compatible with factory injectors, or aftermarket injectors...

Allows connection of the Radium fuel rail 20-0070-02 to the factory fuel system.This Part Fits:YearMakeModelSubmodel2001-2006BMWM3Base