SPC Performance

This custom tool makes adjusting th OE camber cams on the rear of Audis a snap. Even with tires on and the suspension loaded you will be able to access and tighten the nut. Simply loosen the cam...

These sockets are used on Chrylser products with screw in ball joints. They have a 3/4" square drive and are four-point, a perfect fit for our ball joints.

These sockets are used on Chrysler products with screw in ball joints. They have a 3/4" square drive and are four-point, a perfect fit for our ball joints.

Expand the service capability of your ball joint press with this Master Ball Joint Adapter Set. This complete kit includes the adapters and receiving tubes needed to work on GM, Ford and Dodge two...

Replace your balljoint boots on several popular upper control arms. This kit includes 2 ball joint boots and 2 retaining rings.

Remove and replace ball joints without "brute force" methods that can cause costly damage. Now you can take on 4WD ball joint service in addition to servicing most cars. A forcing screw-powered...

With SPC's rebuilt kit you can replace the ball joint or customize the stud length for ride height altered vehicles. Taper: 7.12°, Stud Length +0.25" Over OE. Includes: Ball joint boot, ball stud,...

With SPC's rebuilt kit you can replace the ball joint or customize the stud length for ride height altered vehicles. Taper: 9.5°, Stud Length: +0.25" over OE. Includes: Ball joint boot, ball stud,...

This heavy duty, drop forged alloy steel, lever-type ball joint and tie rod end remover provides good leverage action to remove stubborn tie rod ends or break ball joint tapers easily. Use when space...

Five tools in one, this handy kit consists of three drop forged forks and two handles. One handle is for use with a hammer and one is designed to fit an air hammer. All forks are threaded to...

Change caster and camber with this upper offset pin joint that replaces the OEM pin joint. Use Installation Sleeve set 23580 in conjunction with 72509 Ball Joint Press for removal and installation of...

Change caster and camber with this upper offset pin joint that replaces the OEM pin joint. Use Installation Sleeve set 23580 in conjunction with 72509 Ball Joint Press for removal and installation...

Change caster and camber with this upper offset pin joint that replaces the OEM pin joint. Use Installation Sleeve set 23580 in conjunctuion with 72509 Ball Joint Press for removal and installation...

These offset pin joints replace the upper pin joint on late model Dodge Trucks. They come in 1/2 degree increments and provides for independent wheel caster and/or camber changes up to 1-1/2 degrees...

These offset pin joints replace the upper pin joint on late model Dodge Trucks. They come in 1/2 degree increments and provide for independent wheel caster and/or camber changes up to 1-1/2 degrees...

Change caster and camber with this upper offset pin joint that replaces the OEM pin joint. Use Installation Sleeve set 23580 in conjunction with 72509 Ball Joint Press for removal and installation of...

These offset pin joints replace the upper pin joint on late model Dodge Trucks. They come in 1/2 degree increments and provide for independent wheel caster and/or camber changes up to 1-1/2 degrees...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

The sleeves are designed to match the angle of the yoke on the axle housing to insure proper installation. Sleeve set 23580 is to be used with our Dodge & Jeep Offset Ball Joints (part nos. 23510,...

Quickly and easily adjust rear toe on BMW 3-Series (E46) and Z4 models with this tool from SPC. Simply use your 1/2" drive socket wrench to drive change on the rear toe adjustment brackets on these...

Quickly and easily adjust rear toe on BMW 3-series (E36) models with this tool from SPC. Simply use your 1/2" drive socket wrench to drive change on the rear toe adjustment brackets on these BMW...

Replace your worn or damaged left rear upper control arm on BMW X5 and X6 models with this high quality SPC replacement arm. This arm features a bonded rubber bushing and maintenance free ball joint...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Boot replacement kit for SPC Audi arms. These fit the 81350, 81355, 81360, and 81365 control arm ball joint ends. The kit includes 2 boots and 4 snap rings to service 2 control arms.

These heavy-duty axle caster shims can also be used to adjust pinion angle on Jeep CJs and similar vehicles with 1-3/4" to 2" wide leaf springs. 1/2 degree taper. Six shims per box.This Part...

These heavy-duty axle caster shims can also be used to adjust pinion angle on Jeep CJs and similar vehicles with 1-3/4" to 2" wide leaf springs. 1 degree taper. Six shims per box.This Part...

These heavy-duty axle caster shims can also be used to adjust pinion angle on Jeep CJs and similar vehicles with 1-3/4" to 2" wide leaf springs. 1-1/2 degree taper. Six shims per box.This Part...

These heavy-duty axle caster shims can also be used to adjust pinion angle on Jeep CJs and similar vehicles with 1-3/4" to 2" wide leaf springs. 2 degree taper. Six shims per box.This Part...

These heavy-duty axle caster shims can also be used to adjust pinion angle on Jeep CJs and similar vehicles with 1-3/4" to 2" wide leaf springs. 2-1/2 degree taper. Six shims per box.This Part...

These heavy-duty axle caster shims can also be used to adjust pinion angle on Jeep CJs and similar vehicles with 1-3/4" to 2" wide leaf springs. 3 degree taper. Six shims per box.This Part...

These heavy-duty caster axle shims can also be used to adjust pinion angle on Jeep CJs and similar vehicles with 1-3/4" to 2" wide leaf springs. 3-1/2 degree taper. Six shims per box.This Part...

These heavy-duty axle caster shims can also be used to adjust pinion angle on Jeep CJs and similar vehicles with 1-3/4" to 2" wide leaf springs. 4 degree taper. Six shims per box.This Part...

These heavy-duty caster axle shims can also be used to adjust pinion anle on Jeep CJs and similar vehicles with 1-3/4" to 2" wide leaf springs. 5 degree taper. Six shims per box.This Part...

These heavy-duty axle caster shims can also be used to adjust pinion angle on Jeep CJs and similar vehicles with 1-3/4" to 2" wide leaf springs. 6 degree taper. Six shims per box.This Part...

The OE rear toe link bushing on many Subarus and the Scion FR-S can be easily removed when using the 67647 Bushing Press Adapter. Our Eccentric Toe Bushings (part# 67660) can then be installed using...

Service a wide range of bushings with this versatile press set. Our 29 piece kit will allow you to efficiently remove and install bushings from 1 1/2" to 3" OD (36-80mm ). Save time by servicing the...

Easily replace press-in type control arm bushings on many domestic and imported vehicles with this service kit. Mechanical power screw quickly and easily removes worn bushings and installs them...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.