SPC Performance

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Use this press tool to remove stuck OE cam sleeves from Toyota trucks. The extended length forcing screw allows you to remove the sleeve without removing the steering rack. Recommended when...

A necessary tool for removing the alignment inserts on the upper control arm alignment brackets without damaging the bracket. Includes a center punch for the older GM vehicles and the newer Jeep JK's...

This unique camber and caster adjustment tool fits full size RWD Ford vehicles. Starting in the early 90's Ford RWD vehicles require rotating a separate cam for each angle adjustment. To adjust...

This sleeve set will change camber and/or caster from 1/8 degree to 1-1/2 degree in 1/4 degree increments. Installation requires removal of the upper ball joint stud nut. Break the taper free between...

Double the range of rear camber and toe adjustment on the popular Camaro to increase handling performacne and minimize tire wear. Remove and replace the OE cam bolts with our 87430 kit for ± 1.0°...

These heavy duty cam bolts replace the upper control arm mounting bolts. This kit has the added convenience of slip-on cams which makes installation easier. Remove the O.E. bolts and replace them...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

This cam bolt kit changes camber up to 2-1/2°. It includes an adjusting plate to make the camber adjustment possible. After elongating the lower strut/spindle bolt hole with a rotary file, install...

These heavy duty adjusters provide up to ±2-1/2° front camber change for Chysler/Dodge/Plymouth Mini-Vans and FWD cars along with VW Routans. Use Rotary File Set 85130 to elo ngate holes.

Use this adjustable rear upper control arm to replace the OE arm and get ±3° of camber on the Lexus IS250, IS350, GS350, and RC350 models. SPC's adjustable camber link is manufactured from high-grade...

Use this kit to replace stripped or bent OE alignment cam assemblies on the Mazda Miata MX-5. SPC's cams are heat treated to prevent stripping or warping. This kit is available per wheel and allows...

This Board Set includes our most popular shims, cam kitsand adjustable strut plates. This is a "must have" for anyshop performing 4 wheel alignments on passenger cars.Shipped with our high-strength...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

For Rels Models 204C,204D,204S,205DC,415- Rels part # 29687V For Van Norman Models 243XV,204C,204D,204S,205DC,415 Van Norman Part # 129687,866561 ----3 cut edges----positive rake 10 bits per...

For Model #S 1000,1001,3000,4000,4100,7000,7700---------- On-vehicle lathe 700,705,710---------DRUMSIDE ON 3850 OEM # 6914-6-----12 CUT EDGES----NEGATIVE RAKE 6 bits per pack. California...

For Model # 1000,1001,3000,4000,4100,7000,7700------ On-vehicle lathe 700,705,710----Drum side on 3850 Ammco part # 6914-10-----12 CUT EDGES---- NEGATIVE RAKE 10 bits per pack.

For model #s 3850,4000,7000,7500,6900,6950----- Twin cutter / 9831 Grinding set----- Ammco part# 7681-6 FMC John Bean/Barrett # 91212----- RTI Models BRC500,BRC50-----3 cut edges---positive rake 500...

FOR MODEL#S 67BSD,67DLX,67GSA,69DXL,701ECF,601PF--- FMC or Barrett 400,500,700 Hoffmann/RJ West True-Cut 400/401 OEM Part # 90488--- Perfect Equipment Models 400 & 450 Twin Turn ---3 cut...

For model #s 67BSD,67DLX,67GSA,69DLX,701ECF,601PF--- FMC or Barrett model 400,500,700--- OEM Part#90487 Hoffmann/RJ West part#722-83-4--- Perfect 400 & Twin Turn-Perfect Part # W139---3 cut edges...

For Model #s 67BSD,87DLX,67GSA,69DLX,701ECF,601PF--- FMC OR Barett 400,500,700 Hoffmann/RJ West True Cut 400/401 Hoffmann/RJ West part# 722-83-4--- Perfect Equipment Model # 400 & 450 Twin Turn -Part...

For Model #s 1000,1001,3000,4000,4100,7000,7700------- On-vehicle lathe 700,705,710------- Drum side on 3850------12-18 cut edges----round bits for round tool holders 10 bits per pack.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

For Rels Model SW504 Swing Arm- Rels Part # SW4236-15---- For Snap-On Models YA180,YA281---- 3 cut edges----positive rake for rotor & drum 10 bits per pack.

For Kwik Way Models SDL,DL,850 Disc Lathe,NDL,BDL,CBL----- Kwi-Lathe On-The-Car #108-0005-04 ROTUNDA,LINE-O-TRONICS---- Kwik-Way part# 109-1092-23---- Rels Model SW504 Swing Arm -Rels Part #...

For Pro-Cut Model 610 On-The-Car---- Pro-Cut Part# 50-741 Positive rake carbide---- 3 cut edges----positive rake for Fords 6 bits per pack.

For Pro-Cut Model 610 On-The-Car Lathe---- Pro-Cut Part # 50-701---- 3 cut edges ---- positive rake for Fords 10 bits per pack.

For Van Norman Models 204S,Old Style,205DR,301,303,304,305 310,404,404.4 05 Van Norman Part # 302167 ---- 2 cut edges -- positive rake parallelogram drum bit 3 bits per pack.

This part (number 87280) fits many late model Ford truck and vans with 20mm bolts. With this kit you can adjust caster up to ±2.0°.

This tool for fine,accurate,easy adjustments of camber or caster on GM vehicles. No extra parts or cutting/grinding needed.This Part...

Save time and make adjusting front camber and csater a one- person job on popular GM platforms with this turnbuckle design tool. Simply attach the tool to the front lower control arms and dial in...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

9/16" opening (H/D Trucks). Fits control arm shaft mounting bolts up to 9/16" diameter, including 1/2 Ton - 1 Ton Chevrolet/GMC trucks, HD service. 50 per box.